Categories
Contact Us

Jinan Quick-Fulltek CNC Machinery Co.,ltd

Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

Mobile:86-15628788695

Email:vivien@quickcncrouter.com

Knowledge
Home > Knowledge > Content
Be sure to do the daily inspection and maintenance of the loader
Jul 09, 2018

Safety production is the premise of work, so be sure to do the daily inspection and maintenance of the loader.

It is necessary to check the machine before and after the work every day. To ensure the safety of the work. The inspection contents are as follows:

1. Check whether the work lights, indicators, etc. are damaged, and whether the lines, pipes of electricity, gas and oil are aging or damaged.

2. Check the dust of the engine air filter to affect the air intake effect.

3. Check whether the connecting bolts of the front and rear drive shafts are loose or loose, and the locking force is 530N.M.

4. Check if the connecting bolts such as the pins are loose.

5. Check if the tire is damaged and whether the inflation is sufficient (front wheel: 0.30-0.32MPa, rear wheel: 0.28-0.30 MPa). The tire pressure must be controlled within the specified range. Whether the tire bolts are loose or not, the locking force is 830N.M.

6. Check for oil leakage, water leakage, leakage, and air leakage.

7. Check water level, transmission oil level, hydraulic oil level, brake oil level.

8. Add grease to each nozzle.

9. Check the brake pad wear.

10. Check the wear of the bucket blade and the tooth. When the blade wears 10cm and the tooth wear exceeds 1/4 of the full length, it needs to be repaired or replaced.

11. When disassembling and installing the battery, the positive and negative poles should be separated, and the nut should be tightened firmly. When disassembling, the negative pole (grounding end) should be disconnected first.

12. Avoid accidental contact between metal objects (such as tools, etc.) and battery terminals, resulting in a short circuit.

13, the battery electrolyte contains sulfuric acid, and can produce hydrogen, to avoid cigarettes and open flames close to the battery. If the sulfuric acid solution splashes into the skin and eyes, rinse immediately with plenty of water. If it is serious, go to the hospital immediately.

14. When the machine has just stopped working, the coolant of the engine, the oil in all parts, the exhaust pipe and the muffler are at high temperature. If the cover is removed or the oil is drained or the oil filter is replaced, it will cause burns or other injuries. Wait for the temperature to drop before performing maintenance and inspection.


  • Newsletter
  • Categories
  • Contact Us

    Jinan Quick-Fulltek CNC Machinery Co.,ltd

    Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

    Mobile:86-15628788695

    Email:vivien@quickcncrouter.com

  • QR Code
  • Copyright © Jinan Quick-Fulltek CNC Machinery Co.,ltd. All Rights Reserved.