Categories
Contact Us

Jinan Quick-Fulltek CNC Machinery Co.,ltd

Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

Mobile:86-15628788695

Email:vivien@quickcncrouter.com

Knowledge
Home > Knowledge > Content
Be sure to pay attention to safe work when operating
Jul 09, 2018

For CNC woodworking machinery, we must pay attention to safety work during operation, which is very strict for the operation requirements of the enterprise. The following small series will introduce the three requirements for operating CNC woodworking machinery.

First of all, when we operate the mechanical equipment, we must first check whether the various devices and workpieces of the mechanical equipment are normal. We should tighten the workpiece and tighten it with a thimble, then use both hands to turn the test run, and finally confirm that everything is normal before driving. We also need to select the appropriate feed amount and adjust the speed according to the hardness of the workpiece wood.

Secondly, during the turning process of the mechanical equipment, the operator must not check the smoothness of the workpiece by hand. When sanding with sandpaper, remove the knife holder before proceeding. When the mechanical equipment rotates, we must not use our hands to brake.

Finally, when we process wood, if it is square wood, we must first process it into the shape of a cylinder and then machine it with mechanical equipment. If it is frugal wood or cracked wood, it must not be cut with mechanical equipment.

As the name suggests, CNC woodworking machinery is the equipment used to process wood. It is the "gospel" of the wood industry and the crystallization of science and technology. Changed the previous production mode and improved the production efficiency and quality of timber companies. In order to let everyone better understand the CNC woodworking machinery, then the following small series will be introduced.

1. When the woodworking machine is cutting, the cutting speed of the workpiece is relatively high, and the vibration is large and the noise is large.

2. The manufacturing precision of woodworking machinery is relatively low.

3. The woodworking machinery has a high speed of the cutter shaft, large inertia, and the brake is difficult.

4. The manual operation in the processing process is significant and labor intensive.


  • Newsletter
  • Categories
  • Contact Us

    Jinan Quick-Fulltek CNC Machinery Co.,ltd

    Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

    Mobile:86-15628788695

    Email:vivien@quickcncrouter.com

  • QR Code
  • Copyright © Jinan Quick-Fulltek CNC Machinery Co.,ltd. All Rights Reserved.