Categories
Contact Us

Jinan Quick-Fulltek CNC Machinery Co.,ltd

Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

Mobile:86-15628788695

Email:vivien@quickcncrouter.com

News
Home > News > Content
Ensure The Stability And Quietness Of The Equipment
Jul 09, 2018

As the name suggests, CNC woodworking machinery is a wood processing equipment controlled by a numerical control system, which not only has high processing efficiency but also saves costs. However, the use of any equipment has its proper use environment, in order to avoid unnecessary damage caused by environmental obstacles, then the following small series will introduce you to the environmental selection requirements of CNC woodworking machinery.

The working environment temperature of CNC woodworking machinery should be below 40 degrees. Generally speaking, the numerical control electric control box is internally provided with an exhaust fan or a cooling fan to keep the electronic components, especially the central processing unit, with a constant operating temperature or a small change in temperature difference. When the temperature is too high, the life of the control system components will decrease and the fault will increase. As the temperature increases, an increase in dust can cause bonding on the integrated circuit board and cause a short circuit.

In the operation and operation of CNC woodworking machinery, attention must be paid to its working environment and conditions of use. Only when the lathe is used reasonably can the actual performance be maximized, efficiency can be improved, and cost can be reduced.

The position of CNC woodworking machinery should be chosen away from the vibration source, avoid direct sunlight and heat radiation, and avoid the effects of moisture and airflow. If there is a vibration source near the lathe, an anti-vibration groove should be placed around the lathe. Otherwise, it will directly affect the machining accuracy and stability of the lathe, and it is easy to cause poor contact of the electronic components, causing malfunctions and affecting the reliability of the machine tool.

The machining workshop where CNC woodworking machinery is located not only has large changes in ambient temperature, but also has poor operating conditions, and many kinds of electromechanical equipments, resulting in large fluctuations in the power grid. Therefore, the location of the CNC woodworking machinery requires strict control of the power supply voltage. Power supply voltage fluctuations must be within the allowable range and remain relatively stable. Otherwise it will affect the normal operation of the CNC system.

Woodworking machinery is a relatively common equipment used by wood processing companies and is widely used in various industries. But nowadays, many people choose simple woodworking machinery to save costs, so today Xiaobian will introduce the maintenance method of simple woodworking machinery.

1. According to the workload, the machine should be regularly dust-removed to ensure the normal heat dissipation of the motor.

2. Dust off the pusher track regularly to ensure smooth running of the push table.

3. Check the belt regularly and find that the wear and tear should be replaced in time.

4. Regularly fill the lubricating parts of the fuselage to ensure the stability and quietness of the equipment.


  • Newsletter
  • Categories
  • Contact Us

    Jinan Quick-Fulltek CNC Machinery Co.,ltd

    Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

    Mobile:86-15628788695

    Email:vivien@quickcncrouter.com

  • QR Code
  • Copyright © Jinan Quick-Fulltek CNC Machinery Co.,ltd. All Rights Reserved.