Categories
Contact Us

Jinan Quick-Fulltek CNC Machinery Co.,ltd

Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

Mobile:86-15628788695

Email:vivien@quickcncrouter.com

News
Home > News > Content
Maintenance Summary Of CNC Material Open Machine
Nov 09, 2018

No matter how good the quality of the CNC material opener is, it will often fail if it is not maintained and maintained for a long time. If we want to really make the equipment safe in long-term processing, it will not only require us to be good. We are also required to maintain and maintain the equipment on a regular basis. The following is a summary of the maintenance and maintenance work of the CNC material opener:
1, the device must first check whether the line is intact and the voltage is stable. After checking correctly, the machine power supply is turned on and the machine is empty for a period of time before processing.
There are two main axes of numerical control material opener, one is the air-cooled main shaft and the other is the water-cooled main shaft. The water-cooled main shaft needs to keep the cooling water clean and the normal operation of the water pump. Here is a clear reminder: the water-cooled spindle motor must not appear. Water shortage phenomenon. In addition to the above maintenance work, we must also pay attention to the water temperature. High cooling water temperature will lead to a significant reduction in the cooling effect and will cause certain damage to the spindle. Therefore, the cooling water must be replaced in a timely manner. Winter must also do a good job of anti-freeze measures to prevent water pipes from cracking.
3, regular cleaning of CNC open material electromechanical road box cooling ventilation system, check whether each fan is working properly, regularly clean up the dust in the electronic control box, and check whether the wiring terminal screw is loose to ensure the safe and reliable use of the circuit.
4, timely cleaning of guide rails and around wood chips, and timely equipment of the transmission system to oil.
5, timely cleaning of dust powder and oil on the sensor.
6, after the CNC material opener is processed, first take down the tool, so that the spindle CLIP loose state. This is helpful for extending the service life of the spindle splint. Then we began to clean the countertops and clean them with brushes; Note that the work surface does not normally accumulate debris to avoid platform deformation. Finally, move the nose to the lower left or lower right position to park, prevent collisions, and then cut off the power supply.
7, if not used for a long time, to power up once a week to prevent the machine moisture, to ensure the equipment electrical components stable and reliable performance.
8, do not often open the cabinet, when the material is opened, there will generally be dust, sawdust or metal dust in the air. Once they fall on the circuit board or electronic device in the electronic control box, it is easy to cause the insulation resistance between components to decrease. Even lead to damage to components and circuit boards.
Check the screw of every part of CNC material opener regularly.
10, vacuum pump maintenance:
The metal mesh in the suction port of the water circulation gas pump is used to prevent dust from entering. The filter screen must be kept clean at all times to avoid clogging and cause the pump's pumping speed to drop. When the pump is not in use, it should be energized for several minutes per week to prevent the pump body from rusting. Can not operate normally.
The Tongyou vacuum pump should also loosen the butterfly nut, remove the paper filter core and periodically clean the filter with high-pressure gas. It is found that the filter core is not ventilated or damaged and should be replaced in time. According to the length of use, high-pressure oil guns can be used to oil the bearings.

  • Newsletter
  • Categories
  • Contact Us

    Jinan Quick-Fulltek CNC Machinery Co.,ltd

    Add:3600 West Airport Rd., Lingang Economic Development Zonegaoxin District, Jinan, China

    Mobile:86-15628788695

    Email:vivien@quickcncrouter.com

  • QR Code
  • Copyright © Jinan Quick-Fulltek CNC Machinery Co.,ltd. All Rights Reserved.